Setup: All JMAZ units on the same Wi-Maz wireless channel will follow the transmitter. Charge fixtures fully before events. Set DMX address 001 on all units for master/slave standalone color control, or use the Wi-Maz transmitter with a DMX controller for full remote programming.

View JMAZ Manual (Google Drive)

Uplight

Both Lighting S6 (BOTH SL6)

6×18W RGBWA+UV 24 hr battery App control

Brand / Model

Both Lighting — Smart DJ S6 (BO-S601)

LED Source

6 × 18W RGBWA+UV (6-in-1)

Total: 108W output, 110W consumption

Battery

8800mAh lithium

~24 hr single color · ~6–7 hr auto programs

DMX Channels

6 or 10 channel modes

Wireless Protocol

2.4GHz built-in

Compatible with standard 2.4GHz DMX transmitters

Beam Angle

25°

Control Options

DMX · IR Remote · App · Standalone

App

"Both Lighting" (iOS & Android)

Connect via WiFi for full wireless control

App control: Download the "Both Lighting" app to control colors, programs, and brightness over WiFi from a phone or tablet. The LCD display on the rear of each unit shows the current mode and DMX address. For master/slave without a transmitter, set all units to the same address and activate the IR remote master mode.

Both Lighting S6 Product Page

Moving Heads & Spots

Moving Head

ADJ Focus Spot 4Z Pearl

200W LED 16/18/22 CH 11–22° Zoom

Brand

American DJ (ADJ)

Light Source

200W cool-white LED

Rated 50,000 hours

DMX Channels

16, 18, or 22 channels

5-pin XLR DMX in/out

Zoom

11–22° (motorized)

Focus

Motorized

Pan / Tilt

540° pan · 270° tilt

16-bit fine movement

Color Wheel

8 dichroic colors + white

Gobos

6 rotating + open

All removable & replaceable · 23mm outer / 19mm viewable

Prisms

5-facet linear + 6-facet circular

Both rotating, with indexing control

Power

240W max · AC 100–240V

Daisy chain: 4 units @ 120V · 10 units @ 230V

Dimming Curves

6 selectable modes

Standard, Stage, TV, Architectural, Theatre, Stage 2

Housing

White (Pearl)

Black version = "Focus Spot 4Z" (no Pearl)

Setup tip: Use 5-pin DMX cables for in/out daisy chain. For PowerCON power linking, chain up to 4 units at 120V. The USB port on the unit allows firmware updates — check adj.com for the latest firmware before events.

ADJ Focus Spot 4Z Pearl Product Page

Moving Head

Chauvet Intimidator Spot 355 IRC

90W LED 8 or 14 CH 3-facet Prism

Brand

Chauvet DJ

Light Source

90W LED

DMX Channels

8 or 14 channels

3-pin XLR DMX in/out

Zoom

Manual zoom

Prism

Rotating 3-facet

Splits beam to expand coverage area

Gobos

Changeable via easy-access door

Do not remove the gobo wheel to change

Totem Mode

Yes

Inverted operation keeps beams on the dance floor

IRC Remote

IRC-6 compatible (sold separately)

Power Linking

4 units @ 120V · 7 units @ 230V

Cooling

Fan-cooled

Max operating temp: 104°F / 40°C

Totem mode: Mount the Intimidator upside-down on truss to aim beams downward at the dance floor. The unit's display automatically detects orientation. Use the safety cable at all times when mounting overhead.

Gobo change: To change gobos, do NOT remove the gobo wheel. Turn off and unplug, lay face-up, and access the gobo plate by removing the cover on the moving head. Never change gobos while powered.

Download Intimidator Spot 355 IRC Manual

Effect & Wash Fixtures

Pixel Tube

Chauvet Professional WELL STX 180

Battery / IP65 16 pixel zones W-DMX wireless

Note: This is a Chauvet Professional product (not Chauvet DJ). The WELL STX 180 ships as a kit of 6 fixtures with a charging flight case.

Brand

Chauvet Professional

LED Colors

RGBWW

16 individually controllable pixel zones

Form Factor

1-meter LED tube

Emits 180° of light · IP65 rated outdoor safe

DMX Channels

4, 15, 64, or 67 channel modes

Wireless

Built-in W-DMX receiver

Up to 300m (900ft) range from transmitter

Power

Battery-powered

Charges in the included flight case

Kit Contents

6 fixtures + flight case

Includes magnetic brackets, floor stands, eyebolts, stealth diffusers, IR remote

Stealth Filter

Included (black diffuser)

Makes fixture nearly invisible when off in front of dark backgrounds

Wireless pairing: The W-DMX receiver in each WELL STX 180 must be paired with the W-DMX transmitter before first use. Once paired, it stays linked to that transmitter until re-paired. See the manual for pairing steps. The W-DMX transmitter connects to the DMX controller via 3-pin XLR.

Download WELL STX 180 Manual (Rev. 5)

Effect PAR

FXPar 9 (Chauvet DJ)

RGB+UV + Strobe ring 6/9/22 CH 3-zone control

Brand note: The FXPar 9 is manufactured by Chauvet DJ, not American DJ. The two are separate companies. Confirm you have the correct manual by checking the Chauvet DJ logo on the unit.

Brand

Chauvet DJ

LED Zones

3 independently controllable

Outer ring · Center COB · SMD strobe ring

Outer Ring

9 × 4W RGB+UV LEDs

Center LED

1 × 18.4W RGB COB

Strobe Ring

21 × 0.5W cool-white SMDs

Strobe rate: 0–16.4 Hz

DMX Channels

6, 9, or 22 channels

3-pin XLR DMX in/out

Illuminance

1,450 lux @ 2 m

Beam / Field

25° beam · 45° field

Power

80W @ 120V

Power link: 7 units @ 120V · 13 @ 230V

IRC Remote

IRC-6 compatible (sold separately)

DMX channel mode tip: Use 22-channel mode for full independent control of all three zones (outer ring, center, strobe) plus strobe speed and programs. Use 6-channel mode for simpler RGBWA+strobe control. Never connect a unit in standalone mode to a DMX string — it will broadcast interference.

Download FXPar 9 Manual

Specials & SFX

Ellipsoidal

ETC Source Four LEKO 750

750W HPL lamp 5–90° lens tubes Requires dimmer

Not a DMX fixture. The Source Four LEKO is a conventional ellipsoidal — it requires a dimmer pack or dimmer rack to control intensity. It does not have DMX input on the fixture itself. Connect to a Sensor or portable dimmer to control via a lighting board.

Brand

ETC (Electronic Theatre Controls)

Lamp

750W HPL (halogen)

Also accepts 375W or 575W HPL lamps

Available Lens Tubes

5° / 10° / 14° / 19° / 26° / 36° / 50° / 70° / 90°

Interchangeable — narrow for long throws, wide for close work

Shutter Assembly

4 framing shutters (3-plane stainless steel)

Shape beam into any rectangle, cut hard edges

Gobo Slot

Yes — metal pattern projection

Use with custom logo or pattern gobos

Barrel Rotation

±25° (rotate to orient gobo or shutter cuts)

Gel Frame

6.25" gel frame slot

Dichroic reflector removes 90% of IR heat — gels last significantly longer

Construction

Die-cast aluminum · insulated rear handle

Lens tube selection: Use a 26° tube for most event applications at 15–25 ft throw. Use 36° for closer work (8–15 ft). Use 19° for long-throw GOBO projection (25–40 ft). Lens tubes twist on/off and are held by a quarter-turn locking mechanism. Always let the fixture cool before changing lens tubes.

ETC Source Four Product Page

Strobe

ADJ Mega Flash DMX

800W xenon 2 CH DMX 1–15 flashes/sec

Brand

American DJ (ADJ)

Lamp

800W xenon (ZB-800)

DMX Channels

2 channels

CH 1: Flash speed · CH 2: Dimmer (0–100%)

Flash Rate

1–15 flashes per second

Manual Controls

Speed knob + dimmer knob (rear panel)

Can be operated without a DMX controller

Sound Active

Yes — built-in microphone

Responds to bass frequencies; enable with dipswitch #9 ON

Max Chain

Up to 16 units linked

Voltage

120V only — US outlets

Weight / Size

5 lbs · 4" × 15.5" × 8.5"

Mounting

Built-in adjustable hanging bracket

120V only. This unit only operates on 120V US power. Do not use with foreign power supplies or attempt to run on 240V circuits. The lamp (ZB-800) should be replaced like-for-like when burned out — always replace with the same type.

Photosensitivity advisory: Strobe effects can trigger reactions in guests with photosensitive epilepsy. At events, announce strobe use before the performance or check with the client and venue whether strobing is permitted. Keep flash rate below 3 Hz in public spaces as a general rule.

ADJ Mega Flash DMX Product Page